Different insoles are available for Fire Hero 3.0 to increase or reduce the volume in the shoe. For this purpose, we have developed a slightly thicker insole for narrow feet and a slightly thinner insole for wider feet.

Our Vario-Wide-Fit-System allows you to adjust the volume in the shoe.

The Fire Hero 3.0 has been tested according to the standard DGUV 112-191 (BGR 191) and is therefore approved for orthopaedic insoles.

This allows the Fire Hero 3.0 to be adapted even more optimally to the foot and to support its anatomical structure.

The Fire Hero 3.0 is equipped with a cut protection. This means that you can safely work with chain saws that have a running speed of 24 m per second.

Focus one hundred percent on your job thanks to complete protection of the Fire Hero 3.0.

The Fire Hero 3.0 can be cared for quickly and easily. With black shoe polish, which does not impair the breathability of the leather, and a waterproofing agent, the shoe is ready for any weather. For this model, we especially recommend our black shoe polish, which contains Sun Reflect pigments. This minimises the heating of the shoe by 20%.

The uncomplicated care of the Fire Hero 3.0 ensures long-lasting enjoyment of the shoe's quality.

Thanks to Gore Crosstech, the Fire Hero 3.0 is not only waterproof, but also protects against the entry of blood and body fluids.

The Fire Hero 3.0 can be used in any work without any restriction.

The practical RFID pocket of the Fire Hero 3.0 offers space for an RFID chip. This makes it easier for you to manage your personal protective equipment.

You can fully focus on your mission with the Fire Hero 3.0.

The leather of the shaft of the Fire Hero 3.0 is slightly thinner than that used in the Fire Hero 2. This makes the boot stable but still flexible. The RFID pocket included in the Fire Hero 3.0 is a further difference. We have also improved the sole of the Fire Hero 3.0. Deployments in water or in snowy and icy conditions pose no problem at all. The lacing system and instep protector have also been revised.

The Fire Hero 3.0 is your perfect companion for any type of job.

The Fire Hero 3.0 can be used both indoors and outdoors. Certified according to the fire brigade standard DIN EN 15090, the Fire Hero 3.0 meets the highest safety requirements for fire fighting.

For all those who work indoors and outdoors under challenging conditions.

You can find all the right spare parts for our shoes on our spare parts page.

We produce in a UK shoe size system. The distance between our half UK sizes is only a few millimetres. This makes it more likely to find exactly the right shoe length.

Half UK sizes differ in length by only a few millimetres.

You can simply wash the dirty shoes with water and a brush. Please do not dry the wet shoes (even if they are wet on the inside) on an open fire, a hot stove or a heater. This will change the shape of the shoe. Simply remove the footbed and stuff the shoes with newspaper or use a shoe tree. Then allow the shoes to air dry slowly. We recommend washing the footbed regularly at 30°. In general, it is best to remove the footbed from the shoes after every wear to ensure optimal re-drying.

Simply clean it with a brush and water and let it air dry.

From experience, the Fire Hero 3.0 is a normal size. We therefore recommend that you choose the usual size.

Experience has shown that the shoe fits normally.

HAIX shoes are 100% Made in Europe. For us, this is not just lip service, but lived practice. When it says "Made in Europe" on a HAIX shoe, we assure you that it was made exclusively at our production sites in Mainburg and Mala Subotica, Croatia. Both plants are among the most modern shoe manufacturing facilities in the world.

By the way: "Made in Europe" is not only a promise of quality for us, but also stands for good working conditions, equal opportunities, sustainability and corporate responsibility.